软油精   HD-5500

Soft oil essence  HD-5500

概述: 本品适用于各类纤维的柔软处理，提供纤维及织物良好的柔软、润滑手感外，还使纤维及织物不易产生黄变现象。

Summary: This product is applicable to various kinds of fiber softening, and provide fiber and fabric soft, hand lubrication, and also not easy to produce the fiber and fabric yellowing phenomenon.

理化性状: 外观:淡黄色粘稠液体       组成:双油酸酯季胺硫酸盐     

离子性:阳离子型            PH值:5~6

Physicochemical properties:

Appearance: A yellowish,sticky liquid

Group.: Double oleic acid ester, quaternary ammonium sulfate

Ionicity: Non-ionic

PH value:5-6

产品特性:

1、不含硅、但柔软性，蓬松性好，可避免因破乳而引起的问题:

2、易溶解性，冷水速溶。没有渣子，稀释后产品成乳白色浆液，操作非常简便;

3、环保，可生物降解.

Product Features:

1, Is not silicon, but the softness, the good softness, can avoid the problem caused by demulsification.

2, Is easy to dissolve, cold water instant. There is no dregs, diluted after the product into a milky white slurry, operation is very simple.

3. Environmental protection, biodegradable.

使用方法:

在搅拌情况下将软油精以4%的重量比例，逐渐加入至20℃左右的冷水中或热水中(30-60℃),搅拌30-60min，直至均匀乳白色浆状时，备用。以稀释后的软油精成品为例:

1、浸渍法: 2-5%(O.W.F),35-40℃X15-30分钟(供参考);

2、浸轧法:20-50g/L，带液率60-80%100℃-160℃烘干(供参考);具体用量可根据加工对象、要求和工艺进行调整。

Directions for Use:

In the case of mixing soft oil to the weight ratio of 4%, and gradually added to cold water or hot water of 20 degrees Celsius (30-60 degrees Celsius), 30-60min stirring, until the Uniform milky white pulp, the standby. Take the diluted soft oil finished product as an example:

1、impregnation method: 2 -5% (5%), 35-40-30 minutes (for reference);

2、rolling method: 20-50/ L, with liquid holdup 60 - 80% 100 160 ℃ drying (for reference); The specific dosage can be adjusted according to the processing object, requirement and process.